|
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
6 maps showing domestic trade, finance and construction in Canada. Each map 15 x 32 cm. Each includes a legend, and 2 of the maps include a diagram depicting percentage of distribution. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing roads in Canada. Each map 23 x 64 cm. Includes legend. Features distance table: Road mileage. Scale 1:5,000,000 or one inch to 78.91 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. With inset: (Roads in Yukon Territory, scale 1:10,000,000). Descriptive text on verso: In Canada, the arterial or major roads are owned and maintained by the provincial governments, while, in general, the feeder roads are the responsibility of the local municipalities within the provinces ... The roads shown on this plate are mainly provincial highways as at the end of 1955 ...
Author
[Panckoucke, C. L. F. (Charles Louis Fleury), 1780-1844, France. Commission des sciences et arts d'Egypte]
Note
Antiquités IV
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing different periods of exploration, tracing expeditions in Canada. Each map 23 x 32 cm. Each includes a key and a legend. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Maps show access routes, settlements and posts, and railways. Descriptive text on verso: This plate shows the routes followed by the principal explorers of what is now Canada, prior to Confederation ... [Date of map inferred based upon atlas data.]
Author
[Panckoucke, C. L. F. (Charles Louis Fleury), 1780-1844, France. Commission des sciences et arts d'Egypte]
Note
Antiquités IV
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
9 historical maps of Canada, from "Champlain 1632" to "Arrowsmith 1857 and Russell 1868 combined". Dimensions vary. Descriptive text on verso: This plate is designed to show, by means of historical maps, how the knowledge of the interior of Canada grew from earliest times to the period around Confederation ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
20 maps showing insects, ticks and spiders in Canada. Each map 10 x 13 cm. Each includes a legend. Scale 1:50,000,000 or one inch to 789.1 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This plate shows the ranges of a few of the many thousands of kinds of insects, ticks and spiders that occur in Canada ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
3 maps showing frost in Canada. 2 maps 15 x 32 cm, 1 map 31 x 64 cm. Each includes a scale statement; 1 of the maps includes a legend. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The maps on this plate are based on the occurence of a temperature of 32˚F or lower in a standard thermometer shelter at a level of four feet above the ground ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing seasonal precipitation in Canada. Each map 23 x 32 cm. Each includes a legend. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The total precipitation for any season is the sum of the rainfall and one tenth of the snowfall for that particular three-month period. The mean seasonal precipitation is the mean of the seasonal totals during the period 1921 to 1950 inclusive.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows populated places in Northern Canada. Includes a legend and an index. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This plate shows the permanently populated places in Northern Canada in 1958 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing seasonal temperatures in Canada. Each map 23 x 32 cm. Each includes a legend. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: Temperatures are observed two or more times each day at most observing stations using thermometers mounted in a thermometer shelter which protects them from the weather and direction solar radiation ... This plate shows the mean daily temperatures for January, April, July and October averaged over the 30 year period from 1921 to 1950.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows weather stations and forecast regions in Canada. Includes a legend. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. With 3 insets: Public weather forecast, districts and areas -- Vancouver District, marine weather forecast areas -- Halifax District. Descriptive text on verso: This plate shows the distribution of various types of weather reporting stations as well as the way in which Canada is divided for the purposes of issuing weather information to the public ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
3 maps showing forestry and woodworking in Canada. 2 maps 16 x 32 cm (scale 1:20,000,000), 1 map 23 x 32 cm (1:10,000,000). Each map includes a legend and a diagram. Features 3 charts: Quantity of lumber production by province, 1951 -- Value of woods operations by product, 1951 -- Quantity of lumber cut by kind, 1951. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The Wood Using Industries in Canada comprise the Sash, Door and Planning Mills Industry, the Veneer and Plywood Industry, the Hardwood Flooring Industry, and the Miscellaneous Woodworking Industries ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows major rivers in Canada. Includes a legend. With 17 charts of rivers representing both length and elevation (dimensions vary): MacKenzie River -- Fraser River -- Columbia River -- Saskatchewan River -- St. Lawrence River -- Hamilton River -- Saguenay River -- St. Maurice River -- Columbia River -- Ottawa River -- Winnipeg River -- Nelson River -- Koksoak River -- Albany River -- Churchill River -- Exploits River -- St. John River. With inset (17 x 22 cm): Location of rivers shown in profile. Descriptive text on verso: This plate shows the profiles of major rivers together with the position of important cultural features connected with them (particularly those relating to hydro-electric power development) as of 1955.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
6 maps showing farms in Canada. Each map 15 x 32 cm. Maps include legends, charts and diagrams indicating percentage odistribution. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing forest inventories in Canada. Each map 20 x 31 cm. Includes an index and a legend. Scale 1:63,360 or one inch to one mile. Descriptive text on verso: The portions of the four maps appearing on this plate illustrates the kind of forest maps that are being prepared from air photographs ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows 1951 census divisions in Canada. Includes index. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. With 15 insets (each indexed): Vancouver -- Winnipeg -- Calgary -- Victoria -- Edmonton -- Hamilton -- Ottawa -- St. John's -- London -- Windsor -- Toronto -- Montreal -- Quebec -- Saint John -- Halifax. Descriptive text on verso: This plate shows the main divisions used by the Dominion Bureau of Statistics for the gathering, compiling, and publishing of many of the results of the censuses of Canada ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing urban population in Canada. 1 map 30 x 64 cm (scale 1:10,000,000), 2 maps 17 x 32 cm (1:126,720),1 map 11 x 28 cm (1:20,000,000). Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The map showing the distribution of urban population in 1951 includes all persons residing in cities, towns and villages of 1,000 population or more ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
3 maps showing hospitals in Canada. 1 map 36 x 64 (scale 1:10,000,000), 1 map 17 x 32 cm (1:20,000,000), 1 map 11 x 32 cm (1:20,000,000). Each includes a legend. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This plate shows the location and capacity, in 1951, of hospitals, classified into three categories: General ... Special ... Mental ...
Author
[Panckoucke, C. L. F. (Charles Louis Fleury), 1780-1844, France. Commission des sciences et arts d'Egypte]
Note
Antiquités IV
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing wind and sun in both winter and summer in Canada. Each map 23 x 32 cm. Each includes a legend. Features table: Times of sunrise, sunset and average hours of sunlight for various latitudes ... Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: Data on wind direction have been obtained from recording anenometers which are usually placed between 30 and 70 feet above the ground. Direction frequencies of winds are the percentages of time, regardless of speed, that the wind blows from each of the cardinal directions ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
5 maps showing births, marriages and deaths in Canada. Each map 15 x 32 cm. Each includes a legend and a diagram. Features a diagram: Percentage distribution by quinquennial age groups and sex. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The maps on this plate illustrate the distribution of age-group ratios and sex ratios by census divisions in 1951.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows drainage basins and river flow in Canada. Includes a legend. Features 3 diagrams: Lengths of principal rivers -- Areas of principal lakes -- Existing glaciers and ice caps. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The drainage basins delimited on this plate cover all Canadian land and fresh water areas ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing manufacturing in Canada. Each map 23 x 64 cm. Includes legend and 15 diagrams indicating distribution percentage. Scale 1:5,000,000 or one inch to 78.91 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing pulp and paper mills in Canada. Each map 23 x 64 cm. Includes a legend. Features 2 diagrams: Percentage of production of pulp and paper by provinces, 1951 -- Pulp and paper production, 1951; Pulp and paper exports, 1951. Scale 1:5,000,000 or one inch to 78.91 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This plate shows the location of pulp mills, paper mills and pulp and paper mills and also gives an indication of their annual capacity, in 1951.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing annual precipitation in Canada. 1 map 50 x 64 cm (scale 1:10,000,000), 1 map 24 x 27 (1:20,000,000). Each includes a scale statement and a legend. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The official Canadian rain gauge is a small cylinder with a cross sectional area of ten square inches, mounted with the gauge rim one foot above level ground ... The man annual total precipitation and snowfall maps are primarily based on thirty-year data during the period 1921 to 1950 inclusive.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
6 maps showing textiles, clothing and rubber products in Canada. Each map 15 x 32 cm. Each includes a legend, chart depicting value of production, and diagram depicting percentage of distribution of manufacturing labor. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing industrial minerals in Canada. 1 map 26 x 64 cm, 1 map 20 x 64 cm. Includes legend. Features chart: Value and production of industrial minerals whose value exceeds $500,000, 1955. Scale 1:5,000,000 or one inch to 78.91 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The term "Industrial Minerals" is used here to describe the wide variety of non-metallic minerals which were produced in Canada in 1955 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing rural municipalities in Western Canada. 1 map 50 x 64 cm, 1 map 20 x 32 (scale 1:1,500,000). Includes a key and a legend. Scale 1:2,500,000 or one inch to 39.4 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: Both Quebec and Ontario have a two-tier system of rural government. In Quebec the basic unit is the parish or township and the second tier is made up of counties ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows 1952 federal electoral districts in Canada. Includes index. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. With 11 insets: Edmonton and vicinity -- Calgary and vicinity -- Victoria and vicinity -- Vancouver and vicinity -- Regina and vicinity -- Winnipeg and vicinity -- Toronto and vicinity -- Montreal and vicinity -- Quebec and vicinity -- Hamilton and vicinity -- Ottawa and vicinity. Descriptive text on verso: This plate shows the main divisions used by the Dominion Bureau of Statistics for the gathering, compiling, and publishing of many of the results of the censuses of Canada ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows airlines in Canada. Includes legend. Features distance table: Scheduled air line mileage. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The data for this plate are as of December 1957 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows rural municipalities in Eastern Canada. Includes a legend and 2 keys. Scale 1:5,000,000 or one inch to 78.91 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. With inset: (Iles-de-la-Madeleine, scale 1:1,000,000). Descriptive text on verso: The rural districts are essentially two or more contiguous communities which have combined for the purpose of setting up a municipal council ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing non-ferrous metals in Eastern Canada. 1 map 22 x 64 cm (scale 1:5,000,000), 1 map 25 x 29 cm (1:20,000,000). Each map includes a legend and diagram indicating distribution percentage. Features diagram: Percentage production of non-ferrous metals by provinces, 1955. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. With 2 insets: Sudbury Basin, geological map (17 x 17 cm) -- Mining locations in part of Northern Ontario-Quebec (8 x 10 cm, scale 1:5,000,000), including index. Descriptive text on verso: This plate shows the non-ferrous metal mines, refineries, smelters and reduction works that were in production or coming into production in Eastern Canada in 1955 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing growing seasons in Canada. Each map 23 x 32 cm. Each includes a legend. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This plate illustrates certain aspects of the climate of the growing seasons ... The map was constructed from data for the period 1921 to 1950 inclusive ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows distribution of population in Canada in 1951. Includes a legend. Features 2 diagrams: Numerical distribution of population, 1951 -- Percentage distribution of population, 1951. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 nautical charts showing Canadian shorelines mapped at different scales. Each map 22 x 31 cm. Each includes a scale statement. Descriptive text on verso: This plate shows the coverage of hydrographic charts produced by the Surveys and Mapping Branch of the Department of Mines and Technical Surveys ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing railways in Canada. Each 23 x 64 cm. Includes key and legend. Features distance table: Railway mileage. With 3 insets: Railway in the Whitehorse vicinity (5 x 5 cm) -- Railway in the Churchill vicinity (7 x 5 cm) -- Railway in the Schefferville to the Sept-Iles vicinities (12 x 5 cm). Scale 1:5,000,000 or one inch to 78.91 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This plate shows the location of Canadian railways as of 1957 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
6 maps showing births, marriages and deaths in Canada. Each map 15 x 32 cm. Each includes a legend. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The data for maps on this plate were derived from the 1951 Census of Canada ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
20 maps showing natural vegetation and flora in Canada. 1 map 23 x 27 cm, 14 maps 10 x 13 cm, 2 maps 10 x 17 cm, 3 maps 4 x 13 cm. Each includes a legend. Scale 1:50,000,000 or one inch to 789.1 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: In addition to a general map of the natural vegetation of Canada, this plate shows 18 elementary types of plant distribution which illustrates the historical background of some of the principal groups or elements in the flora of Canada ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing urban growth and land use in Ottawa and Toronto. 2 maps 23 x 40 cm, 2 maps 23 x 24 cm. Includes 2 legends. Scale 1:100,000 or one inch to 1.58 miles. Descriptive text on verso: The urban growth maps on this plate and the three which follow it represent the expansion of areas occupied by structures, but the small open areas classified as parks and playgrounds on the land-use maps are also included ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing urban growth and land use in Vancouver and Victoria. 2 maps 27 x 38 cm, 2 maps 13 x 26 cm. Includes 2 legends. Scale 1:100,000 or one inch to 1.58 miles.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
14 maps showing Furs, whaling and fish processing in Canada. 2 maps 18 x 32 cm (scale 1:20,000,000), 2 maps 15 x 18 cm (1:10,000,000), 7 maps 10 x 15 cm (1:50,000,000), 1 map 19 x 7 cm (1:20,000,000), 2 maps 19 x 9 cm (1:10,000,000). Each map includes a legend, 1 an index, 1 a diagram. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: As trapping is carried on in nearly all parts of Canada, establishments licensed to buy furs are found throughout the country. However, only those outside the main generally settled areas have been shown individually on this map, as they correspond most closely to what are traditionally thought of as "fur trading posts" ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows depths of waters and topography in Canada. Includes a legend indicating depths and heights. Scale 1:5,000,000 or one inch to 78.91 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This plate shows the depths, or bathymetry, of the waters in and around Northern Canada, together with the relief or orography, of the land in this area as it is known in 1957 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing French and British origins in Canada. Each map 23 x 64 cm. Each includes a legend, as well as a diagram indicating percentage distribution of population. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This plate illustrates the distribution of population of French and British origin according to the 1951 census of Canada ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows glaciers and ice caps, as of 1957, as well as extinct glacial lakes and areas formerly sea-covered in Canada. Includes a legend. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This map was compiled by the Geological Survey of Canada from data obtained from many institutions and individuals ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
6 maps showing temperatures in Canada. 4 maps 23 x 32 cm, 2 maps 10 x 12 cm. Each includes a legend. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The mean annual maximum temperature is the mean of the highest temperature recorded each year from 1921 to 1950 inclusive ...
Author
[Panckoucke, C. L. F. (Charles Louis Fleury), 1780-1844, France. Commission des sciences et arts d'Egypte]
Note
Antiquités IV
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing Canada at different scales. Each map 23 x 32 cm. Each includes a scale statement. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The purpose of this plate is to show the extent to which Canada has been mapped on relatively large scales - 1:1,000,000 (15.783 miles to 1 inch) or larger ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows depths of waters and topography in Canada. Includes a legend indicating depths and heights. Features a diagram: Profiles along meridians and parallels. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This plate shows the depths, or bathymetry, of the waters in and around Canada, together with the relief, or orography, of the land as it is known in 1957 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
6 maps showing food industries in Canada. Each map 15 x 32 cm. Each includes a legend. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. [Date of map inferred based upon atlas data.]
|
