|
REFINE
Browse All : Unity of Kennedy Space Center (KSC) from July 1998
1-7 of 7
Description
KSC-97PC-923 (June 23, 1997) --- KENNEDY SPACE CENTER, FL -- Node 1, the first element of the International Space Station to be manufactured in the United States and the first to be launched on the Space Shuttle, is unloaded in its container from an Air Force C-5 jet cargo transport at KSC's Shuttle Landing Facility runway on June 23 after its arrival from NASA's Marshall Space Flight Center (MSFC). The module was then transported to the Space Station Processing Facility. The Node 1 module is currently scheduled to lift off aboard the Space Shuttle Endeavour in July 1998 along with Pressurized Mating Adapters (PMAs) 1 and 2. The 18-foot in diameter, 22-foot-long aluminum module was manufactured by the Boeing Co. at MSFC. Once in space, the Node 1 will function as a connecting passageway to the living and working areas of the International Space Station. It has six hatches that will serve as docking ports to the U.S. laboratory module, U.S. habitation module, an airlock and other Space Station elements.
Description
KSC-97PC-935 (June 25, 1997) --- KENNEDY SPACE CENTER, FL -- Covered in a protective sheath, International Space Station Node 1 is hoisted from its transporting container for installation in its work stand in the Space Station Processing Facility. The module is the first element of the International Space Station to be manufactured in the United States and the first scheduled to be launched on the Space Shuttle. The Node 1 is currently scheduled to lift off aboard the Space Shuttle Endeavour in July 1998, along with Pressurized Mating Adapters (PMAs) 1 and 2. The 18-foot-in-diameter, 22-foot-long aluminum module was manufactured by the Boeing Co. at Marshall Space Flight Center. Once in space, the Node 1 will function as a connecting passageway to the living and working areas of the International Space Station. It has six hatches that will serve as docking ports to the U.S. laboratory module, U.S. habitation module, an airlock and other space station elements.
Description
KSC-97PC-942 (June 26, 1997) --- KENNEDY SPACE CENTER, FL -- Members of the STS-88 crew, from left Mission Specialist Jim Newman, Commander Bob Cabana, Mission Specialist Nancy Currie and Pilot Rick Sturckow, examine the Node 1 of the International Space Station in the high bay of the Space Station Processing Facility. The module is the first element of the International Space Station to be manufactured in the United States and the first scheduled to be launched on the Space Shuttle. The Node 1 is currently scheduled to lift off aboard the Space Shuttle Endeavour in July 1998, along with Pressurized Mating Adapters (PMAs) 1 and 2. The 18-foot-in-diameter, 22-foot-long aluminum module was manufactured by the Boeing Co. at Marshall Space Flight Center. Once in space, the Node 1 will function as a connecting passageway to the living and working areas of the International Space Station. The six hatches on the Node 1 will serve as docking ports to the U.S. laboratory module, U.S. habitation module, an airlock and other space station elements.
Description
KSC-97PC-944 (June 26, 1997) --- KENNEDY SPACE CENTER, FL -- Members of the STS-88 crew, from left Pilot Rick Sturckow, Mission Specialist Nancy Currie, Commander Bob Cabana and Mission Specialist Jim Newman, pose with the Node 1 of the International Space Station in the high bay of the Space Station Processing Facility. The module is the first element of the International Space Station to be manufactured in the United States and the first scheduled to be launched on the Space Shuttle. The Node 1 is currently scheduled to lift off aboard the Space Shuttle Endeavour in July 1998, along with Pressurized Mating Adapters (PMAs) 1 and 2. The 18-foot-in-diameter, 22-foot-long aluminum module was manufactured by the Boeing Co. at Marshall Space Flight Center. Once in space, the Node 1 will function as a connecting passageway to the living and working areas of the International Space Station. The six hatches on the Node 1 will serve as docking ports to the U.S. laboratory module, U.S. habitation module, an airlock and other space station elements.
Description
KSC-97PC-941 (June 25, 1997) --- KENNEDY SPACE CENTER, FL -- A close-up view of the Node 1 in its work stand in the Space Station Processing Facility shows two of its six hatches that will serve as docking ports. The module is the first element of the International Space Station to be manufactured in the United States and the first scheduled to be launched on the Space Shuttle. The Node 1 is currently scheduled to lift off aboard the Space Shuttle Endeavour in July 1998, along with Pressurized Mating Adapters (PMAs) 1 and 2. The 18-foot-in-diameter, 22-foot-long aluminum module was manufactured by the Boeing Co. at Marshall Space Flight Center. Once in space, the Node 1 will function as a connecting passageway to the living and working areas of the International Space Station. The six hatches on the Node 1 will serve as docking ports to the U.S. laboratory module, U.S. habitation module, an airlock and other space station elements.
Description
97-17423 (December 10, 1997) --- The first U.S. module to be launched to the International Space Station, a connecting module called Node 1, is shown as it neared the completion of manufacturing in the spring of 1997. The node was shipped from the Boeing manufacturing facility at the Marshall Space Flight Center in Huntsville, Alabama, to the Kennedy Space Center, Florida, to begin launch preparations in June 1997. The 22-foot long by 14-foot diameter node has six hatches like the one in which this technician is working that will connect to other Russian and U.S. station modules. The node will be launched aboard the Space Shuttle Endeavour in July 1998 and be docked with the already orbiting Functional Cargo Block, to be launched in June 1998 aboard a Russian rocket.
Description
97-17422 (December 10, 1997) --- The interior of the first U.S. module to be launched to the International Space Station, a connecting module called Node 1, is shown as it neared the completion of manufacturing in the spring of 1997. The node was shipped from the Boeing manufacturing facility at the Marshall Space Flight Center in Huntsville, Alabama, to the Kennedy Space Center, Florida, to begin launch preparations in June 1997. Although the 22-foot long by 14-foot diameter node is essentially a passive station component, 216 lines for fluids and gases, 121 electrical cables and six miles of wire are installed in it to provide connections to other modules. The node will be launched aboard the Space Shuttle Endeavour in July 1998 and be docked with the already orbiting Functional Cargo Block, to be launched in June 1998 aboard a Russian rocket.
1-7 of 7
|
