|
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (39) Forest regions: This map shows the extent of the forest regions of Canada under natural conditions ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
3 maps showing frost in Canada. 2 maps 15 x 32 cm, 1 map 31 x 64 cm. Each includes a scale statement; 1 of the maps includes a legend. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The maps on this plate are based on the occurence of a temperature of 32˚F or lower in a standard thermometer shelter at a level of four feet above the ground ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (36) Soil survey maps: The portions of the 4 maps appearing on this plate illustrate the kinds of soil maps that are being prepared by the Experimental Farms Service of the Federal Department of Agriculture in co-operation with the Provincial Departments of Agriculture and the Departments of Soils at Canadian universities.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows weather stations and forecast regions in Canada. Includes a legend. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. With 3 insets: Public weather forecast, districts and areas -- Vancouver District, marine weather forecast areas -- Halifax District. Descriptive text on verso: This plate shows the distribution of various types of weather reporting stations as well as the way in which Canada is divided for the purposes of issuing weather information to the public ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
6 maps showing farms in Canada. Each map 15 x 32 cm. Maps include legends, charts and diagrams indicating percentage odistribution. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing wind and sun in both winter and summer in Canada. Each map 23 x 32 cm. Each includes a legend. Features table: Times of sunrise, sunset and average hours of sunlight for various latitudes ... Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: Data on wind direction have been obtained from recording anenometers which are usually placed between 30 and 70 feet above the ground. Direction frequencies of winds are the percentages of time, regardless of speed, that the wind blows from each of the cardinal directions ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows drainage basins and river flow in Canada. Includes a legend. Features 3 diagrams: Lengths of principal rivers -- Areas of principal lakes -- Existing glaciers and ice caps. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The drainage basins delimited on this plate cover all Canadian land and fresh water areas ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing manufacturing in Canada. Each map 23 x 64 cm. Includes legend and 15 diagrams indicating distribution percentage. Scale 1:5,000,000 or one inch to 78.91 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (90) Shipping: Foreign shipping includes vessels which (1) arrive from a foreign port as last port of call or depart for a foreign port as first port of call; (2) load cargo for a foreign port; (3) have other than Canadian or United Kingdom registry, even though they may have arrived at a Canadian port from another Canadian port or departed from a Canadian port for another Canadian port ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Verso of (71) Food industries.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Verso of (35) Soil regions.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (32) Weather stations and forecast regions: This plate shows the distribution of various types of weather reporting stations as well as the way in which Canada is divided for the purposes of issuing weather information to the public ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
6 maps showing food industries in Canada. Each map 15 x 32 cm. Each includes a legend. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Verso of (62) Sawmills.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
On verso of (13) Physiographic regions.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows forest regions in Canada. Includes an index and a legend. Features 2 diagrams: Areas of forest regions -- Forest regions by provinces. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This map shows the extent of the forest regions of Canada under natural conditions ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
3 maps showing physical geography in Canada. 1 map 50 x 32 cm, 1 map 23 x 42 cm, 1 map 23 x 32. Each includes a scale statement and a legend. Features 2 diagrams: Areas of physiographic regions -- Percentage areas of physiographic regions. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Verso of (68) Farms.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing soil surveys in Canada. Each map 11 x 32 cm. Each includes a scale statement and a legend. Descriptive text on verso: The portions of the 4 maps appearing on this plate illustrate the kinds of soil maps that are being prepared by the Experimental Farms Service of the Federal Department of Agriculture in co-operation with the Provincial Departments of Agriculture and the Departments of Soils at Canadian universities. [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing shipping in Canada. Each map 23 x 64 cm. Each includes a legend. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: Foreign shipping includes vessels which (1) arrive from a foreign port as last port of call or depart for a foreign port as first port of call; (2) load cargo for a foreign port; (3) have other than Canadian or United Kingdom registry, even though they may have arrived at a Canadian port from another Canadian port or departed from a Canadian port for another Canadian port ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (26) Precipitation days and precipitation variability: A "precipitation day" is considered to be a day on which the rainfall recorded amounts to one hundredth of an inch or more, or the snowfall measured is one tenth of an inch or more ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
3 maps showing precipitation in Canada. 2 maps 23 x 32 cm, 1 map 23 x 64 cm. Each includes a scale statement and a legend. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: A "precipitation day" is considered to be a day on which the rainfall recorded amounts to one hundredth of an inch or more, or the snowfall measured is one tenth of an inch or more ... [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing sawmills in Canada. Each map 23 x 64 cm. Includes a legend. Scale 1:5,000,000 or one inch to 78.91 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. With 3 insets: (Sawmills in Vancouver and vicinity, scale 1:500,000) -- (Sawmills in Yukon District, 1:10,000,000) -- (Sawmills in Newfoundland and vicinity, 1:5,000,000). [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
On verso of (81) Manufacturing centres.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (23) Frost: The maps on this plate are based on the occurence of a temperature of 32˚F or lower in a standard thermometer shelter at a level of four feet above the ground ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows soil regions in Canada. Includes a legend. Features 2 diagrams: Areas of principal soil groups and their distribution by provinces and territories -- Percentage areas of principal soil groups. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. [Date of map inferred based upon atlas data.]
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of : The drainage basins delimited on this plate cover all Canadian land and fresh water areas ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (20) Wind and sunshine: Data on wind direction have been obtained from recording anenometers which are usually placed between 30 and 70 feet above the ground. Direction frequencies of winds are the percentages of time, regardless of speed, that the wind blows from each of the cardinal directions ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
6 maps showing domestic trade, finance and construction in Canada. Each map 15 x 32 cm. Each includes a legend, and 2 of the maps include a diagram depicting percentage of distribution. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (74) Non-ferrous metals - Western Canada: This plate shows the non-ferrous metal mines, refineries, smelters and reduction works that were in production or coming into production in Western Canada in 1955 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (59) East coast fisheries: This plate shows the general distribution of certain species of fish and also indicates, by means of coloured dots, the areas of greatest catch and the amounts taken, based largely on statistics of landings of fish in 1952.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (34) Profiles of major rivers: This plate shows the profiles of major rivers together with the position of important cultural features connected with them (particularly those relating to hydro-electric power development) as of 1955.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
On verso of (93) Education.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing seasonal precipitation in Canada. Each map 23 x 32 cm. Each includes a legend. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The total precipitation for any season is the sum of the rainfall and one tenth of the snowfall for that particular three-month period. The mean seasonal precipitation is the mean of the seasonal totals during the period 1921 to 1950 inclusive.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing seasonal temperatures in Canada. Each map 23 x 32 cm. Each includes a legend. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: Temperatures are observed two or more times each day at most observing stations using thermometers mounted in a thermometer shelter which protects them from the weather and direction solar radiation ... This plate shows the mean daily temperatures for January, April, July and October averaged over the 30 year period from 1921 to 1950.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Verso of (47) Distribution of population, 1951.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
3 maps showing forestry and woodworking in Canada. 2 maps 16 x 32 cm (scale 1:20,000,000), 1 map 23 x 32 cm (1:10,000,000). Each map includes a legend and a diagram. Features 3 charts: Quantity of lumber production by province, 1951 -- Value of woods operations by product, 1951 -- Quantity of lumber cut by kind, 1951. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The Wood Using Industries in Canada comprise the Sash, Door and Planning Mills Industry, the Veneer and Plywood Industry, the Hardwood Flooring Industry, and the Miscellaneous Woodworking Industries ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows major rivers in Canada. Includes a legend. With 17 charts of rivers representing both length and elevation (dimensions vary): MacKenzie River -- Fraser River -- Columbia River -- Saskatchewan River -- St. Lawrence River -- Hamilton River -- Saguenay River -- St. Maurice River -- Columbia River -- Ottawa River -- Winnipeg River -- Nelson River -- Koksoak River -- Albany River -- Churchill River -- Exploits River -- St. John River. With inset (17 x 22 cm): Location of rivers shown in profile. Descriptive text on verso: This plate shows the profiles of major rivers together with the position of important cultural features connected with them (particularly those relating to hydro-electric power development) as of 1955.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (60) West coast fisheries: This plate shows the general distribution of certain species of fish and also indicates, by means of coloured dots, the areas of greatest catch and the amounts taken, based largely on statistics of landings of fish for the years between 1951 and 1953.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing urban population in Canada. 1 map 30 x 64 cm (scale 1:10,000,000), 2 maps 17 x 32 cm (1:126,720),1 map 11 x 28 cm (1:20,000,000). Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The map showing the distribution of urban population in 1951 includes all persons residing in cities, towns and villages of 1,000 population or more ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (28) Snow cover: Snow cover data refer primarily to the presence and total depth of a snow cover on the surface of the earth ... Snow cover data are mainly based on the ten-year period from 1941 to 1950 inclusive.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
3 maps showing hospitals in Canada. 1 map 36 x 64 (scale 1:10,000,000), 1 map 17 x 32 cm (1:20,000,000), 1 map 11 x 32 cm (1:20,000,000). Each includes a legend. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This plate shows the location and capacity, in 1951, of hospitals, classified into three categories: General ... Special ... Mental ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (67) Fodder crops and intensive crops: This plate illustrates the distribution of areas devoted to particular crops in 1951 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (79) Fabricated metal industries: This plate shows the distribution of manufacturing industries which use smelted or refined metal as their primary raw material ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
On verso of (80) Textiles, clothing and rubber products.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
5 maps showing births, marriages and deaths in Canada. Each map 15 x 32 cm. Each includes a legend and a diagram. Features a diagram: Percentage distribution by quinquennial age groups and sex. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The maps on this plate illustrate the distribution of age-group ratios and sex ratios by census divisions in 1951.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing pulp and paper mills in Canada. Each map 23 x 64 cm. Includes a legend. Features 2 diagrams: Percentage of production of pulp and paper by provinces, 1951 -- Pulp and paper production, 1951; Pulp and paper exports, 1951. Scale 1:5,000,000 or one inch to 78.91 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This plate shows the location of pulp mills, paper mills and pulp and paper mills and also gives an indication of their annual capacity, in 1951.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing annual precipitation in Canada. 1 map 50 x 64 cm (scale 1:10,000,000), 1 map 24 x 27 (1:20,000,000). Each includes a scale statement and a legend. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The official Canadian rain gauge is a small cylinder with a cross sectional area of ten square inches, mounted with the gauge rim one foot above level ground ... The man annual total precipitation and snowfall maps are primarily based on thirty-year data during the period 1921 to 1950 inclusive.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Verso of (31) Typical weather situations.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
6 maps showing textiles, clothing and rubber products in Canada. Each map 15 x 32 cm. Each includes a legend, chart depicting value of production, and diagram depicting percentage of distribution of manufacturing labor. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N.
|
