|
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (10) Bathy-orography - Eastern Canada: This plate shows the depths, or bathymetry, of the waters in and around Eastern Canada, together with the relief or orography, of the land in this area as it is known in 1957 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Table of contents provides 110 map titles, in order of appearance of plates, including subtitles, insets, and scale in parentheses.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing annual precipitation in Canada. 1 map 50 x 64 cm (scale 1:10,000,000), 1 map 24 x 27 (1:20,000,000). Each includes a scale statement and a legend. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The official Canadian rain gauge is a small cylinder with a cross sectional area of ten square inches, mounted with the gauge rim one foot above level ground ... The man annual total precipitation and snowfall maps are primarily based on thirty-year data during the period 1921 to 1950 inclusive.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Verso of (31) Typical weather situations.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
6 maps showing textiles, clothing and rubber products in Canada. Each map 15 x 32 cm. Each includes a legend, chart depicting value of production, and diagram depicting percentage of distribution of manufacturing labor. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (73) Non-ferrous metals - Eastern Canada: This plate shows the non-ferrous metal mines, refineries, smelters and reduction works that were in production or coming into production in Eastern Canada in 1955 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (100) Quebec City and Montreal: The urban growth maps on this plate and the three which follow it represent the expansion of areas occupied by structures, but the small open areas classified as parks and playgrounds on the land-use maps are also included ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (101) Ottawa and Toronto: The urban growth maps on this plate and the three which follow it represent the expansion of areas occupied by structures, but the small open areas classified as parks and playgrounds on the land-use maps are also included ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (85) Major roads: In Canada, the arterial or major roads are owned and maintained by the provincial governments, while, in general, the feeder roads are the responsibility of the local municipalities within the provinces ... The roads shown on this plate are mainly provincial highways as at the end of 1955 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing industrial minerals in Canada. 1 map 26 x 64 cm, 1 map 20 x 64 cm. Includes legend. Features chart: Value and production of industrial minerals whose value exceeds $500,000, 1955. Scale 1:5,000,000 or one inch to 78.91 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The term "Industrial Minerals" is used here to describe the wide variety of non-metallic minerals which were produced in Canada in 1955 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (57) Rural population: This plate illustrates the distribution of rural population according to the 1951 census of Canada ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (108) Federal electoral districts, 1952: This plate shows the main divisions used by the Dominion Bureau of Statistics for the gathering, compiling, and publishing of many of the results of the censuses of Canada ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows 1952 federal electoral districts in Canada. Includes index. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. With 11 insets: Edmonton and vicinity -- Calgary and vicinity -- Victoria and vicinity -- Vancouver and vicinity -- Regina and vicinity -- Winnipeg and vicinity -- Toronto and vicinity -- Montreal and vicinity -- Quebec and vicinity -- Hamilton and vicinity -- Ottawa and vicinity. Descriptive text on verso: This plate shows the main divisions used by the Dominion Bureau of Statistics for the gathering, compiling, and publishing of many of the results of the censuses of Canada ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (22) Temperature ranges: The mean annual maximum temperature is the mean of the highest temperature recorded each year from 1921 to 1950 inclusive ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (63) Pulp and paper mills: This plate shows the location of pulp mills, paper mills and pulp and paper mills and also gives an indication of their annual capacity, in 1951.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows airlines in Canada. Includes legend. Features distance table: Scheduled air line mileage. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The data for this plate are as of December 1957 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (50) Births, marriages and deaths, etc.: The data for maps on this plate were derived from the 1951 Census of Canada ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (52) Aboriginal population: The main map is an attempt to depict the aboriginal ethnic and linguistic situation as it existed when the various natives were first met by Europeans. It is based on a similar one which accompanied Bulletin 65 of the National Museum of Canada - The Indians of Canada by Diamond Jenness, which was first published in 1932 and republished in 1934 and 1955.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing non-ferrous metals in Eastern Canada. 1 map 22 x 64 cm (scale 1:5,000,000), 1 map 25 x 29 cm (1:20,000,000). Each map includes a legend and diagram indicating distribution percentage. Features diagram: Percentage production of non-ferrous metals by provinces, 1955. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. With 2 insets: Sudbury Basin, geological map (17 x 17 cm) -- Mining locations in part of Northern Ontario-Quebec (8 x 10 cm, scale 1:5,000,000), including index. Descriptive text on verso: This plate shows the non-ferrous metal mines, refineries, smelters and reduction works that were in production or coming into production in Eastern Canada in 1955 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Verso of (48) Density of population, 1951.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (87) Air lines: The data for this plate are as of December 1957 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing growing seasons in Canada. Each map 23 x 32 cm. Each includes a legend. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This plate illustrates certain aspects of the climate of the growing seasons ... The map was constructed from data for the period 1921 to 1950 inclusive ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows distribution of population in Canada in 1951. Includes a legend. Features 2 diagrams: Numerical distribution of population, 1951 -- Percentage distribution of population, 1951. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing railways in Canada. Each 23 x 64 cm. Includes key and legend. Features distance table: Railway mileage. With 3 insets: Railway in the Whitehorse vicinity (5 x 5 cm) -- Railway in the Churchill vicinity (7 x 5 cm) -- Railway in the Schefferville to the Sept-Iles vicinities (12 x 5 cm). Scale 1:5,000,000 or one inch to 78.91 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This plate shows the location of Canadian railways as of 1957 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
6 maps showing births, marriages and deaths in Canada. Each map 15 x 32 cm. Each includes a legend. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The data for maps on this plate were derived from the 1951 Census of Canada ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing urban growth and land use in Ottawa and Toronto. 2 maps 23 x 40 cm, 2 maps 23 x 24 cm. Includes 2 legends. Scale 1:100,000 or one inch to 1.58 miles. Descriptive text on verso: The urban growth maps on this plate and the three which follow it represent the expansion of areas occupied by structures, but the small open areas classified as parks and playgrounds on the land-use maps are also included ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (92) Hospitals: This plate shows the location and capacity, in 1951, of hospitals, classified into three categories: General ... Special ... Mental ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (55) Principal religions: The 1951 Census of Canada enumerated the religious denomination of which each person was either a member or to which he adhered or favoured.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing urban growth and land use in Vancouver and Victoria. 2 maps 27 x 38 cm, 2 maps 13 x 26 cm. Includes 2 legends. Scale 1:100,000 or one inch to 1.58 miles.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
14 maps showing Furs, whaling and fish processing in Canada. 2 maps 18 x 32 cm (scale 1:20,000,000), 2 maps 15 x 18 cm (1:10,000,000), 7 maps 10 x 15 cm (1:50,000,000), 1 map 19 x 7 cm (1:20,000,000), 2 maps 19 x 9 cm (1:10,000,000). Each map includes a legend, 1 an index, 1 a diagram. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: As trapping is carried on in nearly all parts of Canada, establishments licensed to buy furs are found throughout the country. However, only those outside the main generally settled areas have been shown individually on this map, as they correspond most closely to what are traditionally thought of as "fur trading posts" ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows depths of waters and topography in Canada. Includes a legend indicating depths and heights. Scale 1:5,000,000 or one inch to 78.91 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This plate shows the depths, or bathymetry, of the waters in and around Northern Canada, together with the relief or orography, of the land in this area as it is known in 1957 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (9) Bathy-orography - Canada: This plate shows the depths, or bathymetry, of the waters in and around Canada, together with the relief, or orography, of the land as it is known in 1957 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
On verso of (103) Vancouver and Victoria.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing French and British origins in Canada. Each map 23 x 64 cm. Each includes a legend, as well as a diagram indicating percentage distribution of population. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This plate illustrates the distribution of population of French and British origin according to the 1951 census of Canada ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
6 maps showing temperatures in Canada. 4 maps 23 x 32 cm, 2 maps 10 x 12 cm. Each includes a legend. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The mean annual maximum temperature is the mean of the highest temperature recorded each year from 1921 to 1950 inclusive ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing Canada at different scales. Each map 23 x 32 cm. Each includes a scale statement. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The purpose of this plate is to show the extent to which Canada has been mapped on relatively large scales - 1:1,000,000 (15.783 miles to 1 inch) or larger ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (46) Distribution of population, 1851-1941: The maps of this plate show the distribution of population in what is now Canada for the years 1851, 1871, 1901, 1921 and 1941 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows depths of waters and topography in Canada. Includes a legend indicating depths and heights. Features a diagram: Profiles along meridians and parallels. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This plate shows the depths, or bathymetry, of the waters in and around Canada, together with the relief, or orography, of the land as it is known in 1957 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (95) Populated places - Gulf of St. Lawrence Area: This plate shows as many populated places in the Gulf of St. Lawrence area as the scale of the map will permit ... according to the 1951 Census of Canada ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
2 maps showing wheat and barley in Canada. Each map 23 x 64 cm. Features 2 diagrams indicating percentage distribution. Scale 1:10,000,000 or one inch to 157.8 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: This plate illustrates the distribution of the areas seeded in wheat and barley for harvesting in 1951 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (27) Seasonal precipitation: The total precipitation for any season is the sum of the rainfall and one tenth of the snowfall for that particular three-month period. The mean seasonal precipitation is the mean of the seasonal totals during the period 1921 to 1950 inclusive.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing education in Canada. 1 map 19 x 64 cm (scale 1:5,000,000), 1 map 12 x 64 cm (1:5,000,000), 2 maps 15 x 32 cm (1:20,000,000). Each map has a legend, and 1 has a diagram: Percentage distribution of university and college enrollments, 1955. Features a list of "Degree-granting institutions". Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
6 maps showing principal religions in Canada. Each map 15 x 32 cm. Each includes a legend and a diagram. Scale 1:20,000,000 or one inch to 315.6 miles. Lambert Conformal Conic Projection Standard Parallels 49˚N and 77˚N. Descriptive text on verso: The 1951 Census of Canada enumerated the religious denomination of which each person was either a member or to which he adhered or favoured.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (16) Bedrock geology: This map was compiled by the Geological Survey of Canada in 1956 from published and unpublished maps and reports of the Geological Survey of Canada, Provincial Departments of Mines, mining companies and other sources.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
4 maps showing urban growth and land use in Winnipeg and Edmonton. 2 maps 26 x 32 cm, 2 maps 21 x 21 cm. Includes 2 legends. Scale 1:100,000 or one inch to 1.58 miles.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (25) Annual precipitation: The official Canadian rain gauge is a small cylinder with a cross sectional area of ten square inches, mounted with the gauge rim one foot above level ground ... The man annual total precipitation and snowfall maps are primarily based on thirty-year data during the period 1921 to 1950 inclusive.
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
"Price $25. Cat. No. M61-158. Available from the Queen's Printer, Ottawa, Canada. Separate copies of map sheets may be obtained for 50¢ each from Department of Mines and Technical Surveys, Ottawa, Canada."
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (69) Agricultural regions: This plate shows the division of Canada into Agriculture Regions according to the percentage of total gross farm revenue obtained from a particular source in 1951 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Descriptive text on verso of (75) Industrial minerals: The term "Industrial Minerals" is used here to describe the wide variety of non-metallic minerals which were produced in Canada in 1955 ...
Author
[Canada. Department of Mines and Technical Surveys, Nicholson, N. L. (Norman Leon), Comtois, Paul]
Note
Map shows geology of Southern Ontario. Includes legend. Scale 1:1,000,000 or one inch to 15.7 miles. Lambert Conformal Conic Projection Standard Parallels 42˚40' and 45˚20'. With inset: Southeastern Ontario at the same scale. Descriptive text on verso: This plate was compiled by the Geographical Branch from maps published by the Ontario Research Foundation in 1951 ...
|
